All ideas

MANDATORY APPENDIX 13 VESSELS OF NONCIRCULAR CROSS SECTION Rectangular cross section vessels.

Ensure that all calculation codes are updated a maximum of six months after their publication

Series B is often required by clients and at this time, for ASME flange more than 24", the dimensions are those from Series A and not from Series B. it will be good to have the possibility to select Series B too.

Implement FFS as per API 579. Parts of API 579 include: 1 – Introduction 2 – FFS Engineering Evaluation Procedure 3 – Brittle Fracture 4 – General Metal Loss 5 – Localized Metal Loss 6 – Pitting Corrosion 7 – Blisters, HIC, and SOHIC Damage ...

Currently we can only add platform on vertical vessels. Please consider platform on horizontal vessels as well.

Sometimes designers want to create a custom flange specially for large diameter nozzle which can then be checked as a body flange (Appendix 2 etc.). Currently this can be done as a separate model but an option to include custom flange to a nozzle ...

A tall vessel or column is normally designed with a particular liquid level. It would be very helpful if a new user case can be defined allowing to calculate full of liquid (which is not water, it is not the same as hydrotest).

When it is added local loads for nozzles, these loads should be taken in consideration for the support calculation and fundation loads considering the location and orientation of nozzle, for example, Nozzle A located on top head has local loads su...

Add a dialog box to see the required thickness for internal pressure for each component based on temperature and internal pressure. It is applicable for heads, shell, nozzle necks, body flanges - Like picture enclosed.

Please add EN 14015 code for design of storage tank. EN 14015 is the European standard for the design and manufacture of vertical, cylindrical, above-ground, welded steel tanks with flat bottoms.