All ideas

Ensure that all calculation codes are updated a maximum of six months after their publication

I think several autopipe vessel users have encountered this problem: the RTF file takes a long time to open the RTF file is heavy to load to launch a calculation it is necessary to close the RTF file (in this case me I want to look at the rep...

When it is added local loads for nozzles, these loads should be taken in consideration for the support calculation and fundation loads considering the location and orientation of nozzle, for example, Nozzle A located on top head has local loads su...

Please add EN 14015 code for design of storage tank. EN 14015 is the European standard for the design and manufacture of vertical, cylindrical, above-ground, welded steel tanks with flat bottoms.

Currently we can only add platform on vertical vessels. Please consider platform on horizontal vessels as well.

Add saddles for transport on vertical vessels. Calculation should be similar to horizontal vessel on saddles, but with transportation loads. This will eliminate need for an additional model for transport. Transport will be part of report and will ...

When designing heat exchangers per EN 13445‑3, AutoPIPE Vessel currently uses the elastic modulus at the mean metal temperature. However, the elastic modulus should be referenced to the design temperature. Refer attached image.Please add an option...

We have noticed that the software systematically considers all jackets as type 2 in the jacket closure calculation following PD 5500. We need you to integrate the concept of type 1 jackets in the next version to facilitate support for this type of...

To generate parts, assembly and drawings with i logic .

Add the possibility to consider an external corrosion (acting on external diameters)