All ideas

A tall vessel or column is normally designed with a particular liquid level. It would be very helpful if a new user case can be defined allowing to calculate full of liquid (which is not water, it is not the same as hydrotest).

When it is added local loads for nozzles, these loads should be taken in consideration for the support calculation and fundation loads considering the location and orientation of nozzle, for example, Nozzle A located on top head has local loads su...

Add saddles for transport on vertical vessels. Calculation should be similar to horizontal vessel on saddles, but with transportation loads. This will eliminate need for an additional model for transport. Transport will be part of report and will ...

While designing heat exchanger as per EN 13445-3, AutoPIPE Vessel is considering elastic modulus at mean metal temperature but elastic modulus values should be taken at design design temperature. Refer attached snap.

It would be useful for users to have the option of not displaying the “Detailed characteristics of the equivalent beam model” paragraph in the calculation report when a wind/seismic analysis is performed. Indeed, in "Vessel properties", tab "Repor...

ASME Appendix Y - Flat face flanges with metal-to-metal contact outside the bolt circle

They appear in the list of components, the 2D and 3D view. Local loads for them can be checked in Design Component. Their welds appear in the weld map.

Add an option to override the selected bolt area. This can be helpful when non standard neck-down bolt is used.

When API650 is not suitable for a vertical tank, calculation should be done with API620