AutoPIPE Vessel

I think several autopipe vessel users have encountered this problem: the RTF file takes a long time to open the RTF file is heavy to load to launch a calculation it is necessary to close the RTF file (in this case me I want to look at the rep...

Allow the user to inser the combinaton fator for internal pressure (Fp) and the combination factor for external pressure (Fpe) as refered in API 650 paragraph 5.2.2.

Design non circular flanges according EN 13445-4 clause 10.7.

Please add the possibility to enter the values lt, ht and eat according to EN13445 16.12.4 for the design of skirt. In my attached file, when changing lt to 179.7 mm and eat to 7.7 mm, the formula (16.12-70) is now verified without changing the sk...

We have noticed that the software systematically considers all jackets as type 2 in the jacket closure calculation following PD 5500. We need you to integrate the concept of type 1 jackets in the next version to facilitate support for this type of...

Add a dialog box to see the required thickness for internal pressure for each component based on temperature and internal pressure. It is applicable for heads, shell, nozzle necks, body flanges - Like picture enclosed.

A tall vessel or column is normally designed with a particular liquid level. It would be very helpful if a new user case can be defined allowing to calculate full of liquid (which is not water, it is not the same as hydrotest).

When it is added local loads for nozzles, these loads should be taken in consideration for the support calculation and fundation loads considering the location and orientation of nozzle, for example, Nozzle A located on top head has local loads su...

To generate parts, assembly and drawings with i logic .

Sometimes is needed to increase locally the thickness of the vessel wall to reinforce the nozzles (under pressure load or external loads), instead of increasing the whole course or head thickness (for economic reasons). Simulating this local thick...