AutoPIPE Vessel

Improve the guide calculation by allowing the selection of a displacement instead of a stiffness

Add the possibility to consider an external corrosion (acting on external diameters)

To have the painting area for each sides in case of heat exchangers (shell side / tube side)

To have the possibility to consider 3 rows of impingement rods (required by some licensors)

All fixed tubesheet heat exchanger like BEM, AEM and applicable Heat exchanger to be designed for 5 tubesheet condition (refer attachment for more details) like Shell start up etc. For this condition inputs are values of Design temperature, Design...

Implementation of PCC-1 Appendix O for bolt stress determination

Add manufacturing tolerances for heads, in accordance with standards NF E81-100 to NF E81-104 (and other national standards). Or be able to define a manufacturing tolerance as a percentage rather than a fixed value.

The idea is to allow the user to reinforce the legs of the vertical vessels using profiles – Braced legs – see picture enclosed. Best regards

Add more explanations concerning the allowable bounded area with 0 shear stress graphs when designing a nozzle on a cylindrical/spherical shell (e.g showing that it is the eq 16.5-25 taken with different values of Mx and My at design pressure). Al...